networking:atm-1841-adsl
Cisco 1841 ADSL atm interface info
Just captured for it's own sake before it's dead and replaced with fibre.
Now replaced with a 1921 gigabit router, see:- config
1841-adsl#sh int ATM0/0/0
ATM0/0/0 is up, line protocol is up
Hardware is HWIC-DSLSAR (with Alcatel ADSL Module), address is 0013.1a26.e1aa (bia 0013.1a26.e1aa)
MTU 4470 bytes, sub MTU 4470, BW 926 Kbit/sec, DLY 550 usec,
reliability 255/255, txload 25/255, rxload 28/255
Encapsulation ATM, loopback not set
Keepalive not supported
Encapsulation(s): AAL5
23 maximum active VCs, 256 VCs per VP, 1 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/224/0/0 (size/max/drops/flushes); Total output drops: 3106723
Queueing strategy: Per VC Queueing
5 minute input rate 102000 bits/sec, 23 packets/sec
5 minute output rate 91000 bits/sec, 21 packets/sec
443895223 packets input, 39968963 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 54116 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
313017896 packets output, 47515097 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
1841-adsl#
networking/atm-1841-adsl.txt · Last modified: by andrew
