ha:tasmota
Table of Contents
Tasmota crib sheet
Reset to defaults
- Cut power from the device completely for 30 seconds.
- Power the device on and off six times with intervals lower than 10 seconds and leave it on after seventh time.
- Fast power cycle device recovery should activate and the device should be reset to firmware defaults.
Default ip address is:- http://192.168.4.1, this is offered via the AP built into the device for initial config.
Static ipaddress
log in to Web Console
IPAddress1 192.168.21.x
or use the command on Web line, e.g.
http://sonoff/cm?cmnd=IPAddress1%20192.168.1.2
see Wiki Commands for WiFi (https://github.com/arendst/Sonoff-Tasmota/wiki/Commands#wifi)
Change ip to 192.168.21.211 type in console: ipaddress1 192.168.21.211 ipaddress2 192.168.21.1 ipaddress3 255.255.255.0
Set back to DHCP:-
ipaddress1 0.0.0.0
restart 1
NS Panel link:- https://blakadder.com/nspanel-hacking/
https://blakadder.com/nspanel-pro-secrets/
This page has been accessed:-
Today: 1
Yesterday: 0
Until now: 455
ha/tasmota.txt · Last modified: by 127.0.0.1