Hynex Scratchpad

Don't believe anything here, just my notes!

Boot up sequence:-

Self Test...

no debug port attached

         ATM Bridge and Frame Relay Interworking
version & Creation date: 1.21 1996/10/01 09:16:57 

CLEI Version      : 0
Board Model       : 2
Board Serial #    : 10000322
Board Version     : E4.1
Ethernet Addresss : 00:20:70:06:00:63
RAM               : Local 0x100000, Shared 0x80000
FLASH             : Type 1 Size 0x200000
E2PROM            : Type 1 Size 0x8000



Press any key to stop auto-boot...
 0
auto-booting...


Name              : ACP-ERC
IP Address        : 146.1.7.1
IP Network Mask   : 255.255.0.0
Server Name       : Blank
Server IP Address : 0.0.0.0
Boot File Name    : Blank
User name         : Blank
User Password     : Blank
Boot Device       : FLASH
Protocol          : FTP

Starting...on dfe00000

CLEI                          ..............    Passed
BOOT EPROM Checksum           ..............    Passed
FLASH Checksum                ..............    Passed
E2 PROM Checksum              ..............    Passed
Local RAM                     ..............    Passed
Shared RAM                    ..............    Passed
Control RAM                   ..............    Passed
PPIs                          ..............    Passed
82596                         ..............    Passed
Timer/Counter                 ..............    Passed
Interrupt Controller          ..............    Passed
E1 Framer                     ..............    Passed
SAR Registers                 ..............    Passed
CDB Registers                 ..............    Passed
E1 Internal Loopback          ..............    Passed
V35 Internal Loopback         ..............    Passed
Login : user
Password : 
DeskLINK::ACP-ERC~