UNIX Base Agent (UX) Installation

1. On TEP, TEM or RTEM, login to the TEM server:

tacmd login –s itmptem
user: {your_user}
password: {your_password}

2. Issue the following command to push the agent to the client:

West Malling or Fort Dunlop:

/opt/IBM/ITM/bin/tacmd createNode –h  ssh://{client}:22 –u root –p SERVER=itmprtem.unix.brm.pri

Laindon or Lancaster Circus:

/opt/IBM/ITM/bin/tacmd createNode –h  ssh://{client}:22 –u root –p SERVER=itmprtemf.unix.brm.pri

Actual example below;

bash-3.00# /opt/IBM/ITM/bin/tacmd createNode -h  ssh://epmd1-gbe:22 -u root -p SERVER=itmprtem.unix.brm.pri

 Password?

KUICCN022I: Request has been successfully queued to the deploy controller. 
The transaction ID is 1281699141976633000027635, use the getDeployStatus CLI to view the status.

Then enter the current root password

3. Configure the agent on the client to set the failover RTEM and agent autonomy:

/opt/IBM/ITM/bin/itmcmd config –A ux
Agent configuration started...
  
Will this agent connect to a TEMS? [1=YES, 2=NO] (Default is: 1):
TEMS Host Name (Default is: oracle-build): itmprtem.unix.brm.pri

Network Protocol [ip, sna, ip.pipe or ip.spipe] (Default is: ip.pipe):

   Now choose the next protocol number from one of these:
   - ip
   - sna
   - ip.spipe
   - 0 for none
Network Protocol 2 (Default is: 0):
IP.PIPE Port Number (Default is: 1918):
Enter name of KDC_PARTITION (Default is: null):

Configure connection for a secondary TEMS? [1=YES, 2=NO] (Default is: 2): 1
TEMS Host Name (Default is: oracle-build): itmprtemf.unix.brm.pri

Network Protocol [ip, sna, ip.pipe or ip.spipe] (Default is: ip.pipe):

   Now choose the next protocol number from one of these:
   - ip
   - sna
   - ip.spipe
   - 0 for none
Network Protocol 2 (Default is: 0):
IP.PIPE Port Number (Default is: 1918):

Enter Optional Primary Network Name or 0 for "none" (Default is: 0):
Are you installing this product into a clustered environment [1=YES, 2=NO] (Default is: 2):
Agent configuration completed...

4. Update the /opt/IBM/ITM/config/ux.ini file to add the following parameters, before starting the agent:

CTIRA_RECONNECT_WAIT=600
CTIRA_PRIMARY_FALLBACK_INTERVAL=1500

Note: CTIRA_PRIMARY_FALLBACK_INTERVAL needs to be at least 2.5 * CTIRA_RECONNECT_WAIT value.