Differences

This shows you the differences between two versions of the page.

--- voip:cisco7940-7960 [12/06/2025 15:14] – [Cisco XML Services] andrew
+++ voip:cisco7940-7960 [26/02/2026 10:35] (current) – [Cisco 3750 switch config] andrew
@@ Line 21: / Line 21: @@
 </code>
+Better example with QoS for phone.
+<code>
+interface FastEthernet1/0/15
+ description Room 101 7960
+ switchport mode access
+ switchport voice vlan 7
+ priority-queue out
+ mls qos trust device cisco-phone
+ mls qos trust cos
+ spanning-tree portfast
+</code>
+This requires QoS to be set on the switch:-
+-1(config-if)#priority-queue out
@@ Line 140: / Line 155: @@
   Jul 19 20:20:12 localhost in.tftpd[1200]: RRQ from 192.168.5.250 filename dialplan.xml
+Hotline
+To create a line that automatically dials a number when the phone goes off-hook use an empty pattern with a timeout of 0 and rewrite containing the number to dial.
+==== Hotline config in dialplan.xml ====
+This matches any digits and immediately dials the rewrite, x1234 in this case.
+<code>
+<dialTemplate>
+  <TEMPLATE match="" timeout="0" rewrite="1234" />
+</dialTemplate>
+</code>