Differences

This shows you the differences between two versions of the page.

--- networking:ruckus7363accesspoint [11/02/2025 14:24] – [Intro] andrew
+++ networking:ruckus7363accesspoint [10/05/2026 18:19] (current) – [Web] andrew
@@ Line 25: / Line 25: @@
 ==== Web ====
-Browser config is just through a login page, nothing exciting. Default is ''super'' and ''sp-admin'', please change this as soon as possible.
+Browser config is just through a login page, nothing exciting. Default is ''super'' and ''sp-admin'', 192.168.0.1 is the default ip after a hard reset. Please change this as soon as possible.
 ==== SSH ====
@@ Line 32: / Line 32: @@
 <code>
-$ ssh -l adminuser 192.168.21.3
+$ ssh -l adminuser 192.168.0.1
 Please login:
@@ Line 47: / Line 47: @@
 ===== Reflash AP =====
+These can operate in two modes, one is controlled by a wireless controller, the other is Autonomous mode. The APs I received were of course set to controller mode so I needed to reflash them to Autonomous mode. Instructions from Ruckus were fine and the firmware could be found from their ftp site.
+----
+This page has been accessed:- \\
+Today: {{counter|today}} \\
+Yesterday: {{counter|yesterday}} \\
+Until now: {{counter|total}} \\