Differences

This shows you the differences between two versions of the page.

--- networking:ruckus7363accesspoint [11/02/2025 14:18] – [SSH] andrew
+++ networking:ruckus7363accesspoint [11/02/2025 14:24] (current) – [Intro] andrew
@@ Line 5: / Line 5: @@
 {{:networking:ruckus-7363.jpg?200 |}}
-Jottings on my work with some thrown out Ruckus access points. Previously I used a Cisco Access point, but it was 2.4GHz only and didn't support WPA2, just WPA1. I had tried replacing this with a Cisco [[networking:cisco-1262-ap-upgrade-config|1262]] but I found the IOS cli confusing to get the right SSIDs and passwords configured as I wanted with multiple SSIDs connecting to different trunks. I'll probably have another go as I quite like the Cisco kit.
+Jottings on my work with some thrown out Ruckus access points. Previously I used a Cisco [[1200ap-wpa-wpa2|1200]] Access point, but it was 2.4GHz only and didn't support WPA2, just WPA1. I had tried replacing this with a Cisco [[networking:cisco-1262-ap-upgrade-config|1262]] but I found the IOS cli confusing to get the right SSIDs and passwords configured as I wanted with multiple SSIDs connecting to different trunks. I should really just try the Web GUI and give in to joining the point'n'click brigade for this. I'll probably have another go as I quite like the Cisco kit.
 So when I was offered two Ruckus 7363s I was interested to test how they worked, never really having heard of Ruckus before. These came with firmware to work with an external controller rather than standalone, so the first job was to reflash them with the standalone firmware.
@@ Line 27: / Line 27: @@
 Browser config is just through a login page, nothing exciting. Default is ''super'' and ''sp-admin'', please change this as soon as possible.
-====== SSH =====
+==== SSH ====
 First this to note is that the ssh interface does not seem to support passing the user as a parameter:-
@@ Line 45: / Line 45: @@
-=== Reflash AP ===
+===== Reflash AP =====