https://www.rainsbrook.co.uk/wiki/ 2026-05-01T01:14:41+00:00 https://www.rainsbrook.co.uk/wiki/ https://www.rainsbrook.co.uk/wiki/lib/exe/fetch.php?media=wiki:dokuwiki.svg text/html 2024-12-23T10:38:32+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=voip:cisco-phone-cme&rev=1734950312&do=diff Cisco CME Phone System Config Set up a new user, new phone with extension mobility logout-profile For the non logged in profile for each phone find a free logout-profile and number to use Open RANCID on <http://10.10.xx.xx/cgi-bin/cvsweb/configs/> click on CME config (its under cme-2951) and click on text to view the config. Hit ctrl + f and search for logout-profile. Look for the last entry and write down the next free number. You will also have to find a free number to use again by search… text/html 2026-02-26T10:35:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=voip:cisco7940-7960&rev=1772102110&do=diff Cisco 7940 & 7960 [7940] [7960] Cisco 3750 switch config These phones contain a three port switch, one external port is the uplink to the ethernet switch (and pbx), the other external port connects to a downstream device such as a pc. My config uses a voice vlan (vlan 7), this is disabled on a 3750 switch by default. The following enables it and sets up the port.000 text/html 2024-07-04T17:19:55+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=voip:randomvoipnotes&rev=1720113595&do=diff Random voip notes Cisco 7960 TFTP Boot sequence files:- * CTLSEP0014A91043E4.tlv * SIPDefault.cnf * SIP0014A91043E4.cnf * RINGLIST.DAT * dialplan.xml To reboot a SIP Cisco, Press * 6 settings_key at the same time Additionally if you are running SIP firmware on your 7960's then you can text/html 2021-01-07T17:54:54+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=voip:spa3102-a&rev=1610042094&do=diff SPA3102 ATA [SPA3102] <http://www.cisco.com/en/US/products/ps10024/products_qanda_item09186a0080a359dd.shtml> Factory reset: pick up the phone and dial * * * * 7 3 7 3 8 #, then press 1 to confirm. Dial * * * * 110 # to find out its ip address. Remove the LINE connection, just leave the PHONE connection to the analog phone to enter the voice configuration menu. text/html 2020-02-21T11:47:25+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=voip:spa3102&rev=1582285645&do=diff SPA3102 ATA [SPA3102] <http://www.cisco.com/en/US/products/ps10024/products_qanda_item09186a0080a359dd.shtml> Factory reset: pick up the phone and dial * * * * 7 3 7 3 8 #, then press 1 to confirm. Dial * * * * 110 # to find out its ip address. Remove the LINE connection, just leave the PHONE connection to the analog phone to enter the voice configuration menu. text/html 2026-04-28T14:51:37+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=voip:start&rev=1777387897&do=diff Voice over IP See also Cisco 2801 with WiFi and Call Manager Express (CME) SPA3102 ATA Cisco 1760 voip Cisco 7940 & 7960 dhcpd config for Cisco phones Random voip notes