https://www.rainsbrook.co.uk/wiki/ 2026-05-01T01:14:38+00:00 https://www.rainsbrook.co.uk/wiki/ https://www.rainsbrook.co.uk/wiki/lib/exe/fetch.php?media=wiki:dokuwiki.svg text/html 2023-03-21T21:33:25+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=solaris:decomissionserver&rev=1679434405&do=diff Decommission A Sun Server This document has been created in a step-by-step fashion, however I have put in headings for each section so the reader may skip to the relevant parts as required. Removing Flararchive from Client If the server is been backed up using sun flasharchive then this will need to be removed as below: text/html 2024-09-27T09:16:42+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=solaris:ntp-setup-on-solaris&rev=1727428602&do=diff NTP-Setup-On-Solaris Instructions for setting up an NTP client 1. Create the NTP configuration file: /etc/inet/ntp.conf with the following entries: server tick.brm.pri server tock.brm.pri driftfile /etc/inet/ntp.drift slewalways yes disable pll text/html 2022-04-06T11:15:37+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=solaris:samba-installation&rev=1649243737&do=diff SAMBA Installation On Solaris Introduction The Samba software suite is a collection of programs that implements the SMB protocol for UNIX systems, allowing you to serve files and printers to Windows, NT, OS/2 and DOS clients - installs in /usr/local/samba. To use samba, you must also have installed the popt, libiconv, readline, ncurses and either the libgcc-3.3 or the gcc-3.3.2 packages. text/html 2022-04-06T11:18:45+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=solaris:sendmailconfig&rev=1649243925&do=diff Sendmail Configuration on Solaris This document details how to configure sendmail on Solaris systems Solaris 8 Sendmail must be configured by editing the m4 marco file and building a new /etc/mail/sendmail.cf from the m4 macro. It solves a number problems that you would face if you tried to modifiy the sendmail.cf directly. text/html 2021-01-09T13:58:06+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=solaris:solaris11install&rev=1610200686&do=diff Solaris 11 install Install on Netra T1 ok boot cdrom Resetting ... LOM event: +0h6m47s host reset Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard OpenBoot 4.0, 1024 MB memory installed, Serial #zzzzzzz. Ethernet address 0:3:ba:f:b8:1d, Host ID: 830fb81d. Executing last command: boot cdrom Boot device: /pci@1f,0/pci@1,1/ide@d/cdrom@0,0:f File and args: Error: 'SUNW,UltraSPARC-IIe' is not supported by this release of Solaris. Program terminated ok text/html 2021-01-09T17:49:55+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=solaris:solarisnotes&rev=1610214595&do=diff Solaris Notes shutdown or reboot init state Function 0 Firmware Open Boot S or s Single User Mode 1 Admin 2 Multiuser, no NFS 3 Multiuser with NFS 4 Usually Unused 5 Shutdown 6 Reboot Put the system into init5 state for poweroff shutdown -y -i5 -g0 text/html 2021-01-09T17:53:38+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=solaris:solarissan1&rev=1610214818&do=diff Solaris SAN Storage Solaris SAN Fibre Channel One FC hba port is reported as having no link light. db01# luxadm -e port Found path to 3 HBA ports /devices/pci@8,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED /devices/pci@9,600000/fibre-channel@1/fp@0,0:devctl CONNECTED /devices/pci@9,600000/fibre-channel@2/fp@0,0:devctl NOT CONNECTED db01# text/html 2021-01-09T17:53:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=solaris:solarissan2&rev=1610214783&do=diff Solaris SAN 2 Find out wwn number gy-asp-db01# prtconf -vp | grep wwn port-wwn: 21000014.4f4ac5e6 node-wwn: 20000014.4f4ac5e6 If SANsurfer tools are installed, you can also use:- gy-asp-app02# /usr/bin/scli -i all ----------------------------------------------------------------------------- Host Name : gy-asp-app02 HBA Model : QLA2310-SUN Port : 1 OS Instance : 2 Node Name : 20-00-… text/html 2022-04-11T23:20:27+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=solaris:sun-solaris&rev=1649719227&do=diff Sun and Solaris General Solaris Stuff Solaris Notes Old Sun Index NTP-Setup-On-Solaris Solaris Samba Sendmail setup - UGH!! VNC setup Solaris SAN Storage Solaris SAN Storage 1 Solaris SAN Storage 2 Solaris Install Solaris 11 install Decomission Decomission sun server text/html 2022-04-11T23:22:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://www.rainsbrook.co.uk/wiki/doku.php?id=solaris:vnc&rev=1649719321&do=diff VNC Installation in Solaris 10 This document details how to install VNC on Solaris 10. Download the relevant VNC G-Zipped file from www.realvnc.com eg “vnc-4_1_1-sparc_solaris.tar.gz” FTP to /tmp on the relevant server. Un-Zip the file: gzcat –d vnc-4_1_1-sparc_solaris.tar.gz > vnc-4_1_1-sparc_solaris.tar