====== IBM Turboways25 PCI ======

{{ :rb:turboways25-pci.jpg?300|}}

It seems (from [[https://www.chipweb.de/atm/index.php?menu=2&id2=47]]) that an S-Bus version was produces for Sun Microsystems, but I have never seen one.


This is using the Linux driver from Mike Westall, ''it25-0.78e'' {{ :networking:it25-0.78e.tgz |}}.

Copy makefile.sad to makefile before compiling as per README.

On Slackware 10.2.0, Linux 2.4.31 apply this change.

<code>
makefile.sad
diff makefile.sad  makefile
25,26c25,26
<            -pipe -m486 -malign-loops=2             \
<            -malign-jumps=2 -malign-functions=2
---
>            -pipe -march=i486 -falign-loops=2             \
>            -falign-jumps=2 -falign-functions=2
</code>

{{ networking:20180314_103341.jpg?50|}}
Also if compiling on a 64 bit machine, use ''-m32'' to force compile to 32 bits. Maybe changing ''-march=i486'' to a 64 bit arch might solve this (x86_64?).

in atmbase.c:-
<code>
[root@walnut] ~/atm/it25-0.78e ->more atmbase.err 
atmbase.c:32: error: __module_author causes a section type conflict
atmbase.c:33: error: __module_parm_interface causes a section type conflict
[root@walnut] ~/atm/it25-0.78e ->
</code>
Commenting these lines makes the error go away for now anyway.


<code>
[root@localhost it25-0.78e]# cat apelib.err
In file included from apelib.c:17:
atmdd.h:20:36: error: include/linux/spinlock.h: No such file or directory

</code>


This is the line:- #include <asm/spinlock.h> referred to in atmdd.h , but it can be found here:- 

/usr/src/linux-2.6.32/arch/x86/include/asm/spinlock.h


====== Docs ======

{{ :networking:turboways25-72h4627.pdf |IBM Turboways 25 install manual}} \\




This page has been accessed for:- \\
Today: {{counter|today}} \\
Yesterday: {{counter|yesterday}} \\
Until now: {{counter|total}} \\