====== Cisco 2960X series Gigabit ethernet switches ======
{{:networking:cisco2960-x.jpg?200|Cisco 2960-X switch}}
New (to me) switch from eBay, cost all of £5.00 inc postage... Gigabit on all ports and POE but just a bit different to the previous 3750's I had. In addition to the 24 (or 48) copper RJ-45, there are 4x SFP and an additional fastEthernet port intended for out of band management, no POE unsurprisingly.
Also there is a Mini USB for serial as well as the RJ-45 serial console. This presents as ''/dev/ttyACM0''.
===== SFP =====
2960-core#sh interfaces transceiver
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Optical Optical
Temperature Voltage Tx Power Rx Power
Port (Celsius) (Volts) (dBm) (dBm)
--------- ----------- ------- -------- --------
Gi1/0/49 49.5 3.36 -5.1 -3.0
Gi1/0/50 52.5 3.34 -5.3 -3.9
#sh interfaces transceiver properties
...edited...
Name : Gi1/0/48
Administrative Speed: auto
Administrative Duplex: auto
Administrative Auto-MDIX: on
Administrative Power Inline: enable <-------- Copper RJ-45
Operational Speed: auto
Operational Duplex: auto
Operational Auto-MDIX: on
Media Type: 10/100/1000BaseTX <--------
Name : Gi1/0/49
Administrative Speed: auto
Administrative Duplex: auto
Administrative Auto-MDIX: on
Administrative Power Inline: N/A <-------- Optical SFP
Operational Speed: 1000
Operational Duplex: full
Operational Auto-MDIX: on
Media Type: 1000BaseSX SFP <--------
#sh interfaces transceiver detail
...edited...
Optical High Alarm High Warn Low Warn Low Alarm
Receive Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
------- ----------------- ---------- --------- --------- ---------
Gi1/0/49 -3.0 0.0 -0.5 -23.5 -24.1
Gi1/0/50 -3.9 0.0 -0.5 -23.5 -24.1
===== Port Channel (Etherchannel) =====
===== VTP =====