====== Cisco Misc info ======

===== Page Breaks (in sh run etc..) =====


To stop the page breaks:
  
  # terminal length 0
  
To resume them:
  
  # terminal no length 0 (or number ex. 24)

===== Usernames in logins =====

<code>
sw-1(config)#service password-encryption
sw-1(config)#username myuser password topsecret
</code>

This results in:-

  sw-1#sh run
  Building configuration...
  ...edited...
    username myuser password 7 <encrypted password>

Each line needs to be configured to use the local password database:-

<code>
sw-1(config)#line vty 0 4
sw-1(config-line)#login local
</code>



===== SSH access to switch =====


==== Config ssh ====


sw-1(config)#ip ssh version 2

crypto key generate rsa modulus 2048

ip ssh time-out 60  

ip ssh authentication-retries 3 

==== Force ssh only by disabling telnet ====


<code>
line vty 0 4
 password 7 07062341165B4150
 login local
 transport input ssh
line vty 5 15
 password 7 07062341165B4150
 login local
 transport input ssh
</code>