====== Paxton Access card reader ======

No luck finding how this can be made to work with Linux, as it shows up as a human interface device, I'd hoped it would emulate a keyboard, but if you can write a card as well as read one, that doesn't make much sense. A serial device would seem more likely.

Just a place holder for the messages in the hope a seach engine may find and index the info.

<code>
# lsusb
Bus 001 Device 085: ID 1071:0001 Paxton Access LTD USB Proximity Reader

# lsusb -v
Bus 001 Device 085: ID 1071:0001 Paxton Access LTD USB Proximity Reader
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        16
  idVendor           0x1071 
  idProduct          0x0001 
  bcdDevice            0.01
  iManufacturer           1 Paxton Access LTD
  iProduct                2 USB Proximity Reader
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0029
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              200mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      29
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               4
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               4
Device Status:     0x0000
  (Bus Powered)
</code>


<code>
Sep 30 09:19:24 zinc-ops1 kernel: [1107679.832835] usb 1-1.4: new full-speed USB device number 84 using xhci_hcd
Sep 30 09:19:24 zinc-ops1 kernel: [1107679.953476] usb 1-1.4: New USB device found, idVendor=1071, idProduct=0001, bcdDevice= 0.01
Sep 30 09:19:24 zinc-ops1 kernel: [1107679.953496] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 30 09:19:24 zinc-ops1 kernel: [1107679.953506] usb 1-1.4: Product: USB Proximity Reader
Sep 30 09:19:24 zinc-ops1 kernel: [1107679.953513] usb 1-1.4: Manufacturer: Paxton Access LTD
Sep 30 09:19:24 zinc-ops1 kernel: [1107679.962127] hid-generic 0003:1071:0001.000D: hiddev2,hidraw3: USB HID v1.00 Device [Paxton Access LTD USB Proximity Reader] on usb-0000:00:14.0-1.4/input0
Sep 30 09:19:24 zinc-ops1 mtp-probe: checking bus 1, device 84: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4"
Sep 30 09:19:24 zinc-ops1 mtp-probe: bus: 1, device: 84 was not an MTP device
Sep 30 09:19:25 zinc-ops1 mtp-probe: checking bus 1, device 84: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4"
Sep 30 09:19:25 zinc-ops1 mtp-probe: bus: 1, device: 84 was not an MTP device
</code>