Differences

This shows you the differences between two versions of the page.

--- networking:cisco7206 [10/11/2023 15:30] – created - external edit 127.0.0.1
+++ networking:cisco7206 [13/06/2025 22:53] (current) – [ATM] andrew
@@ Line 2: / Line 2: @@
 {{networking:7206.png?300 |7206 with ATM cards}}
 ===== General router config =====
@@ Line 81: / Line 82: @@
 ===== LAN and WAN =====
-This is an abstract from a config, the 7207 end was presented on a E3 34Mb/s on two BNC sockets. See [[telecoms:pdh-sdh|Nokia PDH and Marconi SDH]] \\
+This is an abstract from a config, the 7206 end was presented on a E3 34Mb/s on two BNC sockets. See [[telecoms:pdh-sdh|Nokia PDH and Marconi SDH]] \\
 The far ends were individual 2Mb/s on 1601 or similar routers. The terminators for these were Nokia DNT-2.
@@ Line 136: / Line 137: @@
-Test circuit on the Cisco router.
+Test circuit on the Cisco router. This uses a [[ibm8265|IBM PVC]] (or this [[config-asx200bx#pvc_setup|Marconi PVC]]) which you will have to set up om the ATM switch. I believe the Cisco card supports being a LAN emulation client which wouls usually use a SVC.
 I want the atm addresses to be entirely different to the ones I use internally, so I will set the router to 172.16.0.1 and the other end, my Ubuntu server machine will have the IP address 172.16.0.2.