networking:cisco-2960-x
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| networking:cisco-2960-x [07/06/2026 09:22] – created andrew | networking:cisco-2960-x [10/07/2026 10:10] (current) – [Cisco 2960X series Gigabit ethernet switches] andrew | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Cisco 2960X series Gigabit ethernet switches ====== | ====== Cisco 2960X series Gigabit ethernet switches ====== | ||
| - | {{: | + | {{: |
| + | |||
| + | New (to me) switch from eBay, cost all of £5.00 inc postage... Gigabit on all ports and POE but just a bit different to the previous 3750's I had. In addition to the 24 (or 48) copper RJ-45, there are 4x SFP and an additional fastEthernet port intended for out of band management, no POE unsurprisingly. | ||
| + | Also there is a Mini USB for serial as well as the RJ-45 serial console. This presents as ''/ | ||
| + | |||
| + | |||
| + | ===== SFP ===== | ||
| + | |||
| + | |||
| + | < | ||
| + | 2960-core# | ||
| + | If device is externally calibrated, only calibrated values are printed. | ||
| + | ++ : high alarm, + : high warning, - : low warning, -- : low alarm. | ||
| + | NA or N/A: not applicable, Tx: transmit, Rx: receive. | ||
| + | mA: milliamperes, | ||
| + | |||
| + | | ||
| + | | ||
| + | Port | ||
| + | --------- | ||
| + | Gi1/ | ||
| + | Gi1/ | ||
| + | |||
| + | |||
| + | </ | ||
| + | |||
| + | |||
| + | < | ||
| + | #sh interfaces transceiver properties | ||
| + | ...edited... | ||
| + | Name : Gi1/0/48 | ||
| + | Administrative Speed: auto | ||
| + | Administrative Duplex: auto | ||
| + | Administrative Auto-MDIX: on | ||
| + | Administrative Power Inline: enable | ||
| + | Operational Speed: auto | ||
| + | Operational Duplex: auto | ||
| + | Operational Auto-MDIX: on | ||
| + | Media Type: 10/ | ||
| + | |||
| + | Name : Gi1/0/49 | ||
| + | Administrative Speed: auto | ||
| + | Administrative Duplex: auto | ||
| + | Administrative Auto-MDIX: on | ||
| + | Administrative Power Inline: N/A < | ||
| + | Operational Speed: 1000 | ||
| + | Operational Duplex: full | ||
| + | Operational Auto-MDIX: on | ||
| + | Media Type: 1000BaseSX SFP < | ||
| + | </ | ||
| + | |||
| + | < | ||
| + | #sh interfaces transceiver detail | ||
| + | ...edited... | ||
| + | | ||
| + | | ||
| + | Port | ||
| + | ------- | ||
| + | Gi1/ | ||
| + | Gi1/ | ||
| + | |||
| + | </ | ||
| + | |||
| + | |||
| + | ===== Port Channel (Etherchannel) ===== | ||
| + | |||
| + | |||
| + | |||
| + | ===== VTP ===== | ||
networking/cisco-2960-x.1780824133.txt.gz · Last modified: by andrew
