Differences

This shows you the differences between two versions of the page.

--- networking:cisco-2801-gsm-gps [24/01/2026 16:53] – andrew
+++ networking:cisco-2801-gsm-gps [27/01/2026 14:35] (current) – [Cisco 3g hwic gps] andrew
@@ Line 6: / Line 6: @@
 rommon1>
+<code>
+Set the configuration register with the confreg command if the router is in ROMmon mode:
+rommon 1 > confreg 0x2102
+</code>
 <code>
@@ Line 37: / Line 44: @@
 Router#
+</code>
+<code>
+Router#configure terminal
+Enter configuration commands, one per line. End with CNTL/Z.
+Router(config)#config-register 0x2102
+Router(config)#end
+</code>
+<code>
+!
+boot-start-marker
+boot system flash:c2801-advipservicesk9-mz.151-4.M1.bin
+boot-end-marker
+!
 </code>
@@ Line 149: / Line 171: @@
 [[https://smartvision.solutions/?q=node/25]]
+====== VOIP ======
+<code>
+Router(config)#telephony-service setup
+Warning: <telephony-service setup> command has been deprecated.
+For installation help, please check CME System Administrator Guide.
+Goodbye!
+Router(config)#
+</code>