User Tools

Site Tools


networking:cisco-1921

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
networking:cisco-1921 [25/07/2025 22:31] andrewnetworking:cisco-1921 [22/09/2025 15:55] (current) – [Optical Network Terminator] andrew
Line 2: Line 2:
  
 {{:networking:cisco1921.png?400 |Cisco 1921}} {{:networking:cisco1921.png?400 |Cisco 1921}}
-Replaces [[cisco-1841|Cisco ADSL & 1841 router]] as this is a Fast Ethernet only router, the 1921 is a similar router but with Ge0/0 and Ge0/1 interfaces and two hwic slots. I have a EHWIC-1GE-SFP-CU card as well because in the foreseeable future I will need to bring the internet in from the ISP ONT. +Replaces [[cisco-1841|Cisco ADSL & 1841 router]] as this is a Fast Ethernet only router, the 1921 is a similar router but with Ge0/0 and Ge0/1 interfaces and two hwic slots. I have a EHWIC-1GE-SFP-CU card as well because in the foreseeable future I may need to bring the internet in from the ISP ONT some distance away, so a utp to fibre next to the ONT would link to the WIC SFP port. 
 + 
 {{ :networking:cisco-ehwic-sfp.png?100|Without SFP module}} {{ :networking:cisco-ehwic-sfp.png?100|Without SFP module}}
-Note this is NOT a direct fibre from the ISP, it is fibre to the ONT, then a Ethernet to fibre converter and on to the 1941 SFP fibre in a different building.+Note this is NOT a direct fibre from the ISP, it is  a single WDM fibre to the ONT, then a Ethernet to fibre converter and on to the 1941 SFP fibre in a different building.
  
 {{:networking:ehwic-1ge-sfp.png?200|sfp fibre module fitted}} {{:networking:ehwic-1ge-sfp.png?200|sfp fibre module fitted}}
 +
 +Also, there is a USB port in addition to the serial connector, this implements a usb to seial converter internally, it shows up as /dev/ttyACM0.
 +
  
 First problem... First problem...
Line 86: Line 90:
  
 ====== Optical Network Terminator ====== ====== Optical Network Terminator ======
 +
 +Just for completeness, this is the ONT. it has a single fibre input from OpenReach and a Gigabit ethernet port on an RJ45 for the Subs side interface.
 +The technology used for this is GPON.
 +[[https://www.draytek.co.uk/information/blog/gpon-fibre-fttp-what-is-it-and-how-does-it-work]]
 +
 +[[https://www.cisco.com/c/en/us/support/docs/switches/catalyst-pon-series/216230-understand-gpon-technology.html]]
 +
 +
  
 OpenReach ONT OpenReach ONT
 {{:networking:450px-fttp-ont-pon.jpg?100|}} {{:networking:450px-fttp-ont-pon.jpg?100|}}
 +
 +
 +
 +This page has been accessed:- \\
 +Today: {{counter|today}} \\
 +Yesterday: {{counter|yesterday}} \\
 +Until now: {{counter|total}} \\
 +
  
networking/cisco-1921.1753482668.txt.gz · Last modified: by andrew

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki