User Tools

Site Tools


networking:cisco-1901-gsm-gps

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
networking:cisco-1901-gsm-gps [24/06/2026 13:53] – [GPS] andrewnetworking:cisco-1901-gsm-gps [24/06/2026 14:08] (current) andrew
Line 1: Line 1:
 ====== Cisco 1901 router - 3G and GPS card ====== ====== Cisco 1901 router - 3G and GPS card ======
  
 +This WIC card supports 3G radio and GPS location. It seems to be based round a laptop style GSM / GPS module.
 +
 +{{249597.jpg|Diagrammatic view showing module}}
  
 ===== EHWIC-3G-HSPA-gps ===== ===== EHWIC-3G-HSPA-gps =====
Line 95: Line 98:
 ==== GPS ==== ==== GPS ====
  
 +Configure module to use NMEA sentences, The GPS antenna has to connect to the GSM diversity TNC connector, so you cannot use the GSM diversity at the same time as GPS.
 +
 +On the EHWIC card, there is a green LED for status, it can be used for troubleshooting.
 +It will be off while searching and illuminate solid green once a GPS fix is obtained.
 +
 +Config:-
 <code> <code>
-router(config)# controller cellular 0/0 +1901-1(config)# controller cellular 0/0/0 
-router(config-controller)# gsm gps mode standalone +1901-1(config-controller)# gsm gps mode standalone 
-router(config-controller)# gsm gps nmea +1901-1(config-controller)# gsm gps nmea 
-router(config-controller)# exit+1901-1(config-controller)# exit
 </code> </code>
  
  
-<del>https://routing-bits.com/2010/05/12/hwic-3g-gsm/</del> Link seems broken. +Status and monitoring:-
- +
-[[https://smartvision.solutions/?q=node/25]] +
 <code> <code>
-Router#sh cellular 0/0/0 gps detail +1901-1#sh cellular 0/0/0 gps detail 
  
 GPS Info GPS Info
Line 124: Line 130:
 Satellite Info Satellite Info
 ---------------- ----------------
-Router#+1901-1#
 </code> </code>
  
  
networking/cisco-1901-gsm-gps.1782309203.txt.gz · Last modified: by andrew

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki