Differences

This shows you the differences between two versions of the page.

--- networking:cisco-1841 [05/01/2025 16:54] – [Moving from ADSL to Fibre WAN] andrew
+++ networking:cisco-1841 [10/04/2025 22:22] (current) – [Moving from ADSL to Fibre WAN] andrew
@@ Line 7: / Line 7: @@
 [[networking:cisco-1841-config-nat|ADSL 1841 NAT config]]
-The physical layout is differnet to the 877, so I have included it below.
+The physical layout is different to the 877, so I have included it below.
 ===== Connections =====
@@ Line 45: / Line 45: @@
 Seems too easy.... and currently untested. Updates to follow.
-Well tested now, the above config worked without issue. After the fibre and NTE was installed and operaational, I connected the ethernet and after I had an L2 link, I disconnected the ADSL RJ45 cable. Whilst this was happening, I was running a ping from an internal machine to 1.1.1.1, after the ADSL was disconnected, this was lost, but 13 pings later it came back up using the fibre.
+Well tested now, the above config worked without issue. After the fibre and NTE was installed and operational, I connected the ethernet and after I had an L2 link, I disconnected the ADSL RJ45 cable. Whilst this was happening, I was running a ping from an internal machine to 1.1.1.1, after the ADSL was disconnected, this was lost, but 13 pings later it came back up using the fibre.
 So a 13s approx outage, impressive.
@@ Line 52: / Line 52: @@
-===== Troubleshooting =====
+===== Troubleshooting ADSL =====
 Following is when router is operating normally, line is UP:-