Differences

This shows you the differences between two versions of the page.

--- networking:adva-fsp150 [05/11/2025 21:02] – [Serial Port] andrew
+++ networking:adva-fsp150 [22/01/2026 21:28] (current) – [Serial Port] andrew
@@ Line 11: / Line 11: @@
 address of the FSP 150CCf-825 is: 192.168.0.2/24.\\
+[[https://pinoutguide.com/dev/Adva/]] - not tried.
 ==== Serial port ====
@@ Line 18: / Line 20: @@
 banner and continue query displays. Enter “y” to the query and the serial console CLI\\
 prompt (-->) will then be displayed.\\
+This may be a web only not serial login from what I have read.
+Default web log on
+<code>
+User covaro1
+password covaro#1
+</code>
 ==== Password Reset ====
@@ Line 81: / Line 93: @@
 ''defaultdb'' from above doesn't seem to work.
+''boot factorydefaults'' is another suggestion I have seen. Seems to work, see below but I still don't know the serial password:-
+<code>
+U-Boot SPL 2014.01-237834 (Aug 21 2018 - 09:49:11)
+BOARD : Adva Ge110ulc Board
+CLOCK: EOSC1 clock 25000 KHz
+CLOCK: EOSC2 clock 25000 KHz
+CLOCK: F2S_SDR_REF clock 0 KHz
+CLOCK: F2S_PER_REF clock 0 KHz
+CLOCK: MPU clock 800 MHz
+CLOCK: DDR clock 366 MHz
+CLOCK: UART clock 100000 KHz
+CLOCK: MMC clock 3125 KHz
+CLOCK: QSPI clock 400000 KHz
+RESET: COLD
+INFO : Watchdog enabled
+SDRAM: Initializing MMR registers
+SDRAM: Calibrating PHY
+SEQ.C: Preparing to start memory calibration
+SEQ.C: CALIBRATION PASSED
+SDRAM: 384 MiB
+FPGA : Programming FPGA
+SF: Read data capture delay calibrated to 3 (0 - 6)
+SF: Detected is25lq032b with page size 4096, total: 4194304
+FPGA : Programming FPGA passed
+SF: Detected is25lq032b with page size 4096, total: 4194304
+U-Boot 2014.01-249732 (Apr 15 2019 - 09:19:20)
+CPU   : Altera SOCFPGA Platform
+Board: GE102Pro(EFMH)
+PartNumber: 1078904891-01
+I2C:   ready
+DRAM:  384 MiB
+NAND:  1024 MiB
+MMC:   ALTERA DWMMC: 0
+SF: Read data capture delay calibrated to 3 (0 - 6)
+SF: Detected is25lq032b with page size 4096, total: 4194304
+In:    serial
+Out:   serial
+Err:   serial
+Net:   mii0
+=>     <-------------------------------------  Space pressed to interrupt normal boot.
+=> help
+?       - alias for 'help'
+boot    - boot the system
+help    - print command description/usage
+mtest   - simple RAM read/write test
+phyinv  - displays the contents of physical inventory
+reboot  - reset the system
+version - print monitor, compiler and linker version
+=>
+=> boot factorydefaults       <---------------------------- factorydefaults entered.
+Warning: all saved configuration will be erased.
+Continue (yes/no)? yes        <---------------------------- Of course..... I want to get access to it.
+Mounting boot filesystem ...
+## Booting kernel from Legacy Image at 02000000 ...
+   Image Name:   Linux-3.14.17-9.6.3-197-227159      <------Yay!! Fuck off windows, everybody hates you.
+   Image Type:   ARM Linux Kernel Image (uncompressed)
+   Data Size:    5322112 Bytes = 5.1 MiB
+   Load Address: 00008000
+   Entry Point:  00008000
+## Flattened Device Tree blob at 00000100
+   Booting using the fdt blob at 0x000100
+   Loading Kernel Image ... OK
+   Loading Device Tree to 03ff8000, end 03fffcd3 ... OK
+Starting kernel ...
+Uncompressing Linux... done, booting the kernel.
+System kernel started
+System init started
+System applications started
+Application init complete
+RDM Embedded 7.2.419.8070-I [23-Jun-2009]
+Copyright (c) 1992-2009 Birdstep Technology.  All Rights Reserved.
+Network Interface Device (NID) 9.6.3-197 (Thu Jul  2 15:04:33 CST 2020)
+Login:root
+Password:********          <--------------- not ChgMeNOW it seems.
+Invalid user name or password
+</code>
+The ‘covaro1’ and ‘covaro#1’ username and password I've read are for the web login.
+However the mgmt ethernet port on my unit shows a link during boot (presumably the leds are driven from the NIC hardware)
+but after it has booted, it looses the link, it looks like the OS disables the port, so maybe it has to be enabled from the serial console menu?