Differences

This shows you the differences between two versions of the page.

--- ha:evchsrger [22/11/2025 22:30] – [EVSE based controller] andrew
+++ ha:evchsrger [24/11/2025 00:06] (current) – [EVSE based controller] andrew
@@ Line 19: / Line 19: @@
 {{:ha:img_20251122_215836.jpg?400 |}}
 Components used (L to R)
-  * 100A double pole disconnector to isolate the unit
+  * 100A double pole disconnector to isolate the unit. This is fed via a 16A industrial connector and 20A MCB in a consumer unit, it would be better to have a 16A MCB in it too, but there wasn't space and the 16A socket should always be fed via an MCB anyway. This whole consumer unit is protected by an RCD.
   * 20A contactor driven by the evse module, this provides a 240v output but at low current. The double pole contactor isolates the EV unless energised, so until the cable is connected, the cable is unpowered.
   * EVSE module (The blue bit marked MinMax visible is the AC to DC converter). This is WiFi capable, but I have disabled it because....
@@ Line 32: / Line 32: @@
 {{:ha:img_20251122_215818.jpg?400 |}}
+----
+===== MQTT info =====
+This is a simple flow from NodeRed to show data which can be extracted from the EVSE module.
+{{:ha:nodered-evse.png?600|}}