Differences

This shows you the differences between two versions of the page.

--- getac:startex [22/11/2025 20:08] – created andrew
+++ getac:startex [22/11/2025 21:31] (current) – [Smartcard reader] andrew
@@ Line 1: / Line 1: @@
 ====== Getac rugged laptop ======
+===== Fingerprint Sensor =====
+**dmesg output**
 <code>
 [    2.342600] usb 1-7.2: Product: EgisTec_ES603
 [    2.342602] usb 1-7.2: Manufacturer: EgisTec
 </code>
+**lsusb output**
+<code>
+Bus 001 Device 005: ID 1c7a:0603 LighTuning Technology Inc. ES603 Swipe Fingerprint Sensor
+</code>
+**Modules to install**
 <code>
@@ Line 15: / Line 27: @@
   fprintd libfprint-2-2 libfprint-2-tod1 libpam-fprintd
 </code>
+** Enroll a finger**
 <code>
@@ Line 28: / Line 43: @@
 andrew@getac:~$
 </code>
+===== Smartcard reader =====
+**lsusb**
+<code>
+Bus 001 Device 007: ID 058f:9540 Alcor Micro Corp. AU9540 Smartcard Reader
+</code>
+<code>
+# pcsc_scan
+PC/SC device scanner
+V 1.7.1 (c) 2001-2022, Ludovic Rousseau <ludovic.rousseau@free.fr>
+Using reader plug'n play mechanism
+Scanning present readers...
+: Virtual PCD 00 00
+: Virtual PCD 00 01
+: Alcor Micro AU9540 00 00
+ Reader 0: Virtual PCD 00 00
+  Event number: 0
+  Card state: Card removed,
+ Reader 1: Virtual PCD 00 01
+  Event number: 0
+  Card state: Card removed,
+ Reader 2: Alcor Micro AU9540 00 00
+  Event number: 0
+  Card state: Card removed,
+</code>
+Waiting for card to be inserted
+Card inserted upside down so no electrical contact
+<code>
+ Reader 2: Alcor Micro AU9540 00 00
+  Event number: 1
+  Card state: Card inserted, Unresponsive card,
+ Reader 2: Alcor Micro AU9540 00 00
+  Event number: 2
+  Card state: Card removed,
+<code>
+Card the right way up
+<code>
+ Reader 2: Alcor Micro AU9540 00 00
+  Event number: 3
+  Card state: Card inserted,
+  ATR: 3B 6B 00 00 00 31 C1 64 09 78 61 31 0F 90 00
+ATR: 3B 6B 00 00 00 31 C1 64 09 78 61 31 0F 90 00
++ TS = 3B --> Direct Convention
++ T0 = 6B, Y(1): 0110, K: 11 (historical bytes)
+  TB(1) = 00 --> VPP is not electrically connected
+  TC(1) = 00 --> Extra guard time: 0
++ Historical bytes: 00 31 C1 64 09 78 61 31 0F 90 00
+  Category indicator byte: 00 (compact TLV data object)
+    Tag: 3, len: 1 (card service data byte)
+      Card service data byte: C1
+        - Application selection: by full DF name
+        - Application selection: by partial DF name
+        - EF.DIR and EF.ATR access services: by GET RECORD(s) command
+        - Card without MF
+    Tag: 6, len: 4 (pre-issuing data)
+      Data: 09 78 61 31
+    Mandatory status indicator (3 last bytes)
+      LCS (life card cycle): 0F (unknown)
+      SW: 9000 (Normal processing.)
+Possibly identified card (using /usr/share/pcsc/smartcard_list.txt):
+B 6B 00 00 00 31 C1 64 09 78 61 31 0F 90 00
+	Mastercard (Bank)   <-------------------------- Correct!
+ Reader 2: Alcor Micro AU9540 00 00
+  Event number: 4
+  Card state: Card removed,
+#
+</code>
+====== NFC ======
+<code>
+# apt install libnfc-bin libnfc6 mrtdreader
+...edited...
+The following additional packages will be installed:
+  libmrtd0t64 libusb-0.1-4
+The following NEW packages will be installed:
+  libmrtd0t64 libnfc-bin libnfc6 libusb-0.1-4 mrtdreader
+<code>