Hynex

Sample Hynex Configuration LAN Emulation

EPROM version       : 1.21 1996/10/01 09:16:57
Created on          : Tue Nov 4 14:49:36 IST 1997
 
Software version    : Ds.2k with LAN Emulation
Created on          : Thu Mar 18 18:18:13 IDT 1999
 
FLEX version        : Wed Aug 28 16:18:44 IDT 1996
 
Kernel version      : WIND version 2.4
VxWorks version     : 5.2
E2prom version      : 11
Own MAC Address     : 00:20:70:06:02:9c
Bridge Aging Time   : 300 seconds
 
ENET Hardware configuration
Base board          : ATM over E1 (Hardware version E4.3 Serial Number 10001091)
Memory structure
FLASH               : 2048 Kbytes
RAM Local           : 1024 Kbytes
RAM Shared          : 512 Kbytes
E2PROM              : 32 Kbytes

SNMP Agent Configuration
------------------------
Authentication Traps: Enabled
Community           : erc
  
 
System Configuration
--------------------
System         : Ethernet Remote ATM Bridge and Frame Relay Interworking
Location       : ERC
Contact        : Media_Hub
Functionality  : Bridge Only
 
  
LANE Configuration
------------------
Network Prefix  : 39.82.6F.31.48.00.00.00.00.00.01.00.04
LES ATM Address : 00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00
LECS ATM Address: 47.00.79.00.00.00.00.00.00.00.00.00.00.00.A0.3E.00.00.01.00
Elan Name       : ERCADMIN
 
 
IP Configuration
----------------
IP Address       : 146.1.14.1
IP Netmask       : 255.255.0.0
IP Name          : NERA
IP Gateway       : 0.0.0.0

Password

Admin level password:- “H1netMaint” gets several new menus.

PVC Setup

Hynex connected to ports 5.1/5.2 on 8265
Works ok.

BMH_8265> show pvc all

-------------------------------------------------------------------------------
PVC:Port 5.01 (id=1,Primary,BE) PTP-PVC VP/VC=0/50
-> Party:(id=0) VP/VC=0/50 STATUS:Active
   39.82.6F.31.48.00.00.00.00.00.01.00.01.42.00.00.00.05.02.00(port 5.02)
-------------------------------------------------------------------------------
PVC:Port 5.02 (id=10001,Secondary,BE) PTP-PVC VP/VC=0/50
-> Party:(id=0) VP/VC=0/50 STATUS:Active
   39.82.6F.31.48.00.00.00.00.00.01.00.01.42.00.00.00.05.01.00(port 5.01)
BMH_8265>   



Connected to 5.2 and 8285 port 1.1

rb/hynex1.txt · Last modified: 21/09/2018 22:40 by andrew