Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
rb:copywiki [02/05/2013 14:27]
andrew created
rb:copywiki [10/10/2013 14:21] (current)
Line 1: Line 1:
-[root@ls-xxxx01 wikibackup]#​ cat  push-ro-to-remotesite.sh 
-#!/bin/bash 
  
-#based on pushtozz.sh,​ written Andrew Stringer 11 August 2011 
-#Purpose is to push wiki to remote sites 
-#modified 12/09/2012 to push to remote sites based on text file. 
- 
-#This script uses rsync over ssh, so the scope ssh key needs adding to 
-#the nnnn account authorised hosts file to allow passwordless logins. 
- 
- 
-#turn on debugging, -x starts, +x stops 
-set +x 
- 
-#set to 3 for testing, this forces sending mail, normally should be 0 
-SENDEMAIL=0 
- 
-EMAIL="​me@mydomain.com"​ 
- 
-WIKILOCATION=/​home/​scope/​wikibackup/​backup 
- 
-REMOTESITES=/​home/​scope/​wikibackup/​remotesitelist.txt 
- 
-TMPLOG=/​tmp/​pushwikitoremotesites.txt-$$ 
-DATE=`date +%b" "​%d"​ "%Y` 
-DAY=`date +%a` 
- 
- 
-DATENUM=`date +%d` 
-#Test to force 1st of the month 
-#DATENUM=01 
-if [ $DATENUM == 01 ] 
-then 
-        MONTHTEST="​ - 1st of the month test email."​ 
-        SENDEMAIL=2 
-fi 
- 
-for REMOTESERVER in `cat ${REMOTESITES}` 
-do 
- 
-        echo "Push Wiki to remote site" > ${TMPLOG} 
-        echo "​========================"​ >> ${TMPLOG} 
-        echo ""​ >> ${TMPLOG} 
-        echo "From /​home/​scope/​wikibackup/​push-ro-to-remotesite.sh on ls-xxxx"​ >> ${TMPLOG} 
-        echo ""​ >> ${TMPLOG}; 
-        echo ""​ >> ${TMPLOG}; 
- 
-        OUTPUT=`rsync -a --progress ​ -e ssh ${WIKILOCATION}/​* wworks@${REMOTESERVER}:/​home/​wworks/​wiki-stagingarea/​webroot >> ${TMPLOG} ` 
-        RESULT=$? 
- 
-        echo " " >> ${TMPLOG} 
-        echo "rsync Returncode is >​${RESULT}<"​ >> ${TMPLOG} 
-        echo " " >> ${TMPLOG} 
-        echo "Rsync Output is >​${OUTPUT}<"​ >> ${TMPLOG} 
- 
-        if [ ${RESULT} != 0 ] 
-                then 
-                echo "Wiki push to ${REMOTESERVER} may not have completed, return code was not 0, ( >​${RESULT}<​ ). " >> ${TMPLOG} 
-                echo "​Command returned \"​${OUTPUT}\"​ " >> ${TMPLOG} 
-                SENDEMAIL=1 
-        fi 
- 
- 
-        #Send mail 
-        if [ ${SENDEMAIL} -eq 1 ] 
-                then 
-                /bin/mailx -s "Wiki Push Problems (${REMOTESERVER}).${MONTHTEST}"​ ${EMAIL} < ${TMPLOG} 
- 
-        elif [ ${SENDEMAIL} -eq 2 ] 
-                then 
-                /bin/mailx -s "Wiki push (${REMOTESERVER}),​ ${MONTHTEST}."​ ${EMAIL} < ${TMPLOG} 
- 
-        elif [ ${SENDEMAIL} -eq 3 ] 
-                then 
-                /bin/mailx -s "Wiki push (${REMOTESERVER}),​ set to testing."​ ${EMAIL} < ${TMPLOG} 
-        else 
- 
-                echo "No errors"​ > /dev/null 
- 
-        fi 
-done 
- 
- 
- 
-rm $TMPLOG 
-exit 0 
- 
-[root@ls-xxxx wikibackup]#​ 
  
 +  [root@ls-xxxx01 wikibackup]#​ cat  push-ro-to-remotesite.sh
 +  #!/bin/bash
 +  ​
 +  #based on pushtozz.sh,​ written Andrew Stringer 11 August 2011
 +  #Purpose is to push wiki to remote sites
 +  #modified 12/09/2012 to push to remote sites based on text file.
 +  ​
 +  #This script uses rsync over ssh, so the scope ssh key needs adding to
 +  #the nnnn account authorised hosts file to allow passwordless logins.
 +  ​
 +  ​
 +  #turn on debugging, -x starts, +x stops
 +  set +x
 +  ​
 +  #set to 3 for testing, this forces sending mail, normally should be 0
 +  SENDEMAIL=0
 +  ​
 +  EMAIL="​me@mydomain.com"​
 +  ​
 +  WIKILOCATION=/​home/​scope/​wikibackup/​backup
 +  ​
 +  REMOTESITES=/​home/​scope/​wikibackup/​remotesitelist.txt
 +  ​
 +  TMPLOG=/​tmp/​pushwikitoremotesites.txt-$$
 +  DATE=`date +%b" "​%d"​ "%Y`
 +  DAY=`date +%a`
 +  ​
 +  ​
 +  DATENUM=`date +%d`
 +  #Test to force 1st of the month
 +  #DATENUM=01
 +  if [ $DATENUM == 01 ]
 +  then
 +          MONTHTEST="​ - 1st of the month test email."​
 +          SENDEMAIL=2
 +  fi
 +  ​
 +  for REMOTESERVER in `cat ${REMOTESITES}`
 +  do
 +  ​
 +          echo "Push Wiki to remote site" > ${TMPLOG}
 +          echo "​========================"​ >> ${TMPLOG}
 +          echo ""​ >> ${TMPLOG}
 +          echo "From /​home/​scope/​wikibackup/​push-ro-to-remotesite.sh on ls-xxxx"​ >> ${TMPLOG}
 +          echo ""​ >> ${TMPLOG};
 +          echo ""​ >> ${TMPLOG};
 +  ​
 +          OUTPUT=`rsync -a --progress ​ -e ssh ${WIKILOCATION}/​* wworks@${REMOTESERVER}:/​home/​wworks/​wiki-stagingarea/​webroot >> ${TMPLOG} `
 +          RESULT=$?
 +  ​
 +          echo " " >> ${TMPLOG}
 +          echo "rsync Returncode is >​${RESULT}<"​ >> ${TMPLOG}
 +          echo " " >> ${TMPLOG}
 +          echo "Rsync Output is >​${OUTPUT}<"​ >> ${TMPLOG}
 +  ​
 +          if [ ${RESULT} != 0 ]
 +                  then
 +                  echo "Wiki push to ${REMOTESERVER} may not have completed, return code was not 0, ( >​${RESULT}<​ ). " >> ${TMPLOG}
 +                  echo "​Command returned \"​${OUTPUT}\"​ " >> ${TMPLOG}
 +                  SENDEMAIL=1
 +          fi
 +  ​
 +  ​
 +          #Send mail
 +          if [ ${SENDEMAIL} -eq 1 ]
 +                  then
 +                  /bin/mailx -s "Wiki Push Problems (${REMOTESERVER}).${MONTHTEST}"​ ${EMAIL} < ${TMPLOG}
 +  ​
 +          elif [ ${SENDEMAIL} -eq 2 ]
 +                  then
 +                  /bin/mailx -s "Wiki push (${REMOTESERVER}),​ ${MONTHTEST}."​ ${EMAIL} < ${TMPLOG}
 +  ​
 +          elif [ ${SENDEMAIL} -eq 3 ]
 +                  then
 +                  /bin/mailx -s "Wiki push (${REMOTESERVER}),​ set to testing."​ ${EMAIL} < ${TMPLOG}
 +          else
 +  ​
 +                  echo "No errors"​ > /dev/null
 +  ​
 +          fi
 +  done
 +  ​
 +  ​
 +  ​
 +  rm $TMPLOG
 +  exit 0
 +  ​
 +  [root@ls-xxxx wikibackup]#​
 +  ​

rb/copywiki.txt ยท Last modified: 10/10/2013 14:21 (external edit)