Differences

This shows you the differences between two versions of the page.

Link to this comparison view

rb:cisco-1200-ap-wpa-wpa2 [10/01/2019 15:28] (current)
andrew created
Line 1: Line 1:
 +====== 1200 WiFi Access Point WPA & WPA2 config ======
 +
 +
 +
 +  AP1200#show run
 +  Building configuration...
 +  ​
 +  Current configuration : 2183 bytes
 +  !
 +  ! No configuration change since last restart
 +  !
 +  version 12.3
 +  no service pad
 +  service timestamps debug datetime msec
 +  service timestamps log datetime msec
 +  service password-encryption
 +  !
 +  hostname AP1200
 +  !
 +  enable secret 5 $1$X86e$WcSzzzvccccccxxxxxhkSNcD.
 +  !
 +  ip subnet-zero
 +  ip domain name rainsbrook.co.uk
 +  ip name-server x.x.x.x
 +  !
 +  !
 +  no aaa new-model
 +  dot11 vlan-name default vlan 1
 +  !
 +  vlan 1
 +    authentication open 
 +    authentication key-management wpa
 +    guest-mode
 +    wpa-psk ascii 7 096E1A0713adasdasdasd
 +  !
 +  !
 +  !
 +  username Cisco password 7 04zzasdasasdasd
 +  username admin privilege 15 password 7 045zzssxxasdasdasd
 +  !
 +  bridge irb
 +  !
 +  ​
 +WPA uses ''​encryption vlan 1 mode ciphers tkip'',​ WPA2 uses ''​encryption vlan 1 mode ciphers aes''​.
 +
 +  !
 +  interface Dot11Radio0
 +   no ip address
 +   no ip route-cache
 +   !
 +   ​encryption vlan 1 mode ciphers tkip 
 +   !
 +   ssid <​my-ssis>​
 +   !
 +   speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic0
 +   ​channel 2472
 +   ​station-role root access-point
 +   no dot11 extension aironet
 +  !
 +  interface Dot11Radio0.1
 +   ​encapsulation dot1Q 1 native
 +   no ip route-cache
 +   ​bridge-group 1
 +   ​bridge-group 1 subscriber-loop-control
 +   ​bridge-group 1 block-unknown-source
 +   no bridge-group 1 source-learning
 +   no bridge-group 1 unicast-flooding
 +   ​bridge-group 1 spanning-disabled
 +  !
 +  interface FastEthernet0
 +   no ip address
 +   no ip route-cache
 +   ​duplex auto
 +   speed auto
 +  !
 +  interface FastEthernet0.1
 +   ​encapsulation dot1Q 1 native
 +   no ip route-cache
 +   ​bridge-group 1
 +   no bridge-group 1 source-learning
 +   ​bridge-group 1 spanning-disabled
 +  !
 +  interface BVI1
 +   ip address w.x.y.z 255.255.255.0
 +   no ip route-cache ​
 +  !
 +  ip default-gateway a.b.c.d
 +  no ip http server
 +  no ip http secure-server
 +  ip http help-path http://​www.cisco.com/​warp/​public/​779/​smbiz/​prodconfig/​help/​eag
 +  !
 +  snmp-server community topsecret RO
 +  snmp-server location GuessWhere
 +  snmp-server contact wwwxxx@rainsbrook.co.uk
 +  snmp-server chassis-id ap1200
 +  !
 +  control-plane
 +  !
 +  bridge 1 route ip
 +  !         
 +  !
 +  !
 +  line con 0
 +   ​transport preferred all
 +   ​transport output all
 +  line vty 0 4
 +   login local
 +   ​transport preferred all
 +   ​transport input all
 +   ​transport output all
 +  line vty 5 15
 +   login
 +   ​transport preferred all
 +   ​transport input all
 +   ​transport output all
 +  !
 +  sntp server w.x.y.z
 +  sntp broadcast client
 +  end
  

rb/cisco-1200-ap-wpa-wpa2.txt ยท Last modified: 10/01/2019 15:28 by andrew