Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
rb:brocade-pwreset [24/01/2013 18:37]
andrew
rb:brocade-pwreset [10/10/2013 15:21] (current)
Line 20: Line 20:
 Completely untested solutions. Completely untested solutions.
  
-  I found something interesting in the internet. A person used the "go to adrs" option to boot into the system without asking for password.  +  I found something interesting in the internet. A person used the "go to adrs" option to boot into the system without asking ​ 
-  But the system is not the same as mine. After booting to the adress from the OSLoader entry he mounted the drive with: mount -o remount,​rw,​noatime /+  ​for password.  
 +  But the system is not the same as mine. After booting to the adress from the OSLoader entry he mounted the drive with:
 +  ​mount -o remount,​rw,​noatime /
   ​   ​
   Then he did: mount /dev/hda2 /mnt   Then he did: mount /dev/hda2 /mnt
Line 58: Line 60:
  
  
-  1. Connect the serial console to the SAN switch (or  director). (Default serial console settings: Baud rate&#​128;&#​147;​ 9600, Data  bits 8, Parity&#​128;&#​147;​ none, Stop bits -1, Flow control none).+  1. Connect the serial console to the SAN switch (or  director). (Default serial console settings:
 +     Baud rate&#​128;&#​147;​ 9600, Data  bits 8, Parity&#​128;&#​147;​ none, Stop bits -1, Flow control none).
   ​   ​
   2. Reboot the switch   2. Reboot the switch
        
-  3. Press ESC at the message â&#​128;&#​156;​Hit ESC to stop autoboot:&#​128;&#​156;,​ the Boot PROM menu displays with the following options:+  3. Press ESC at the message â&#​128;&#​156;​Hit ESC to stop autoboot:&#​128;&#​156;, ​ 
 +  ​the Boot PROM menu displays with the following options:
   ​   ​
   1) Start system.   1) Start system.
Line 115: Line 119:
   sh-2.04# mount -o remount,​rw,​noatime /   sh-2.04# mount -o remount,​rw,​noatime /
  
-  9.  Mount the second partition to /mnt (this will get from the value of "&#​128;&#​156;​OSRootPartition"&#​128;&#​157;​ variable in "&#​128;&#​156;​printenv"&#​157;​ output&#​128;&#​147;​ usually it  will be "&#​128;&#​156;​hda2"&#​157;,​ that is, /dev/hda2)+  9. Mount the second partition to /mnt (this will get from the value of "&#​128;&#​156;​OSRootPartition"&#​128;&#​157; ​ 
 +    ​variable in "&#​128;&#​156;​printenv"&#​157;​ output&#​128;&#​147; ​ 
 +    ​usually it  will be "&#​128;&#​156;​hda2"&#​157;,​ that is, /dev/hda2)
  
   sh-2.04# mount /dev/hda2 /mnt   sh-2.04# mount /dev/hda2 /mnt

rb/brocade-pwreset.txt · Last modified: 10/10/2013 15:21 (external edit)