Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
rb:1200ap-wpa-wpa2 [03/03/2016 09:39]
andrew
— (current)
Line 1: Line 1:
-====== 1200 WiFi Access Point WPA & WPA2 config ====== 
- 
- 
- 
-  AP1200#show run 
-  Building configuration... 
-  ​ 
-  Current configuration : 2183 bytes 
-  ! 
-  ! No configuration change since last restart 
-  ! 
-  version 12.3 
-  no service pad 
-  service timestamps debug datetime msec 
-  service timestamps log datetime msec 
-  service password-encryption 
-  ! 
-  hostname AP1200 
-  ! 
-  enable secret 5 $1$X86e$WcSzzzvccccccxxxxxhkSNcD. 
-  ! 
-  ip subnet-zero 
-  ip domain name rainsbrook.co.uk 
-  ip name-server x.x.x.x 
-  ! 
-  ! 
-  no aaa new-model 
-  dot11 vlan-name default vlan 1 
-  ! 
-  vlan 1 
-    authentication open  
-    authentication key-management wpa 
-    guest-mode 
-    wpa-psk ascii 7 096E1A0713adasdasdasd 
-  ! 
-  ! 
-  ! 
-  username Cisco password 7 04zzasdasasdasd 
-  username admin privilege 15 password 7 045zzssxxasdasdasd 
-  ! 
-  bridge irb 
-  ! 
-  ​ 
-WPA uses ''​encryption vlan 1 mode ciphers tkip'',​ WPA2 uses ''​encryption vlan 1 mode ciphers aes''​. 
- 
-  ! 
-  interface Dot11Radio0 
-   no ip address 
-   no ip route-cache 
-   ! 
-   ​encryption vlan 1 mode ciphers tkip  
-   ! 
-   ssid <​my-ssis>​ 
-   ! 
-   speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic0 
-   ​channel 2472 
-   ​station-role root access-point 
-   no dot11 extension aironet 
-  ! 
-  interface Dot11Radio0.1 
-   ​encapsulation dot1Q 1 native 
-   no ip route-cache 
-   ​bridge-group 1 
-   ​bridge-group 1 subscriber-loop-control 
-   ​bridge-group 1 block-unknown-source 
-   no bridge-group 1 source-learning 
-   no bridge-group 1 unicast-flooding 
-   ​bridge-group 1 spanning-disabled 
-  ! 
-  interface FastEthernet0 
-   no ip address 
-   no ip route-cache 
-   ​duplex auto 
-   speed auto 
-  ! 
-  interface FastEthernet0.1 
-   ​encapsulation dot1Q 1 native 
-   no ip route-cache 
-   ​bridge-group 1 
-   no bridge-group 1 source-learning 
-   ​bridge-group 1 spanning-disabled 
-  ! 
-  interface BVI1 
-   ip address w.x.y.z 255.255.255.0 
-   no ip route-cache ​ 
-  ! 
-  ip default-gateway a.b.c.d 
-  no ip http server 
-  no ip http secure-server 
-  ip http help-path http://​www.cisco.com/​warp/​public/​779/​smbiz/​prodconfig/​help/​eag 
-  ! 
-  snmp-server community topsecret RO 
-  snmp-server location GuessWhere 
-  snmp-server contact wwwxxx@rainsbrook.co.uk 
-  snmp-server chassis-id ap1200 
-  ! 
-  control-plane 
-  ! 
-  bridge 1 route ip 
-  !          
-  ! 
-  ! 
-  line con 0 
-   ​transport preferred all 
-   ​transport output all 
-  line vty 0 4 
-   login local 
-   ​transport preferred all 
-   ​transport input all 
-   ​transport output all 
-  line vty 5 15 
-   login 
-   ​transport preferred all 
-   ​transport input all 
-   ​transport output all 
-  ! 
-  sntp server w.x.y.z 
-  sntp broadcast client 
-  end 
  

rb/1200ap-wpa-wpa2.1456997974.txt.gz ยท Last modified: 03/03/2016 09:39 by andrew