Old ASX-200

Default is user "asx" and password "f0replay"




New ASX-200BX

Password Reset
http://www.velocityreviews.com/forums/t38256-password-recovery-forethought.html
http://www.expert sex change.com/Networking/Misc/Q_21405373.html

With a termial attached to the serial port, reset the switch using a
straightened paper clip. When "Decomp..." displays on the front panel
display, press and hold the "Next" and "Select" buttons. After a short
time the display should stop scrolling. When you release the buttons,
the prompt "Boot without reading flash? (y/n)" should be displayed on
the terminal. Type "y" and press <Enter>. The promt "Clear the AMI
password?" (y/n) will be displayed. Type "y" and press <Enter>. The AMI
user account on the switch now has no password.

================================================================================
The ami username didn't work for me, but here's what did.

Press Enter repeatedly when the unit boots, or press Ctrl-Break after the unit boots to get to the 
Mon960 prompt (=>). Normally this prompt is used to upgrade the switch, but it can also be 
used to clear the configuration.

ef cfg

then reboot the switch.

The switch will come up in factory testing mode, choose option 10 to turn this mode off and reboot.
You should have a factory fresh configuration.

Set to
user:	ami
passw:	admin